355hp Gas Sealed Engine

Up-build Kit

(Does Not Include Engine Assembly)

385 FT LBS Torque

· PCM & Custom Wiring Harness (6800 Rev. Limit)

· Low Oil Pressure & Overheat Protection

· Steel Wet 8Qt. Oil Pan

· Front Motor Mounts

· Electric Fuel Pump & Filter

· 550 Lift Hydraulic Roller Cam

· Valve Springs

· Throttle Cable & PCM Holder

· 1 ¾” Headers

· Installation Instructions

Rules:

 Cast Iron Block Only Std. Bore

Head Only #862 or #706

Crank Forging Only #12552216

PCM Only #09354896

GM Injector Only #25317628 or #25323974

PCM Must Be Sent To Schwanke Engines

For Programming

Cable Throttle Body Only

Mass Air Flow Only #25168491

Schwanke Spec Induction Hardened Cam

Must Maintain 17” of Vacuum at Idle

Tech Rotation of PCM’s & Scanner Vacuum Check.

Sealing of Engine Track Option.

Tech Rotation of PCM’s & Scanner Vacuum Check.

Sealing of Engine Track Option.

$2,499.00